119512 Lamb Vacuum Motor

Our brand new (not rebuilt) Lamb Ametek 119512 Motor is used in some central vacuum brands and models. 119512 motor is a Lamb Ametek original motor.

Specifications:

• Fan Stages – 1
• Bottom Diameter – 5.7″
• Voltage – 110-120
• Hertz – 50-60
• Height – 6-3/4″
• Bolt Height -1-1/4″
• Waterlift -87.5″
• CFM – 138.3
• AirWatts – 418
• Amps – 11.2

What to note: The 119512 uses a Tangential Bypass. The 119512 vacuum motor may say 9512 or 11-9512.

What motors it replaces: Only replaces 119512 motor.

When to replace: The signs that a 119512 Lamb motor needs to be replaced include: mini breaker popping, electrical smell, excessive blue sparks seen from motor top, you only hear a click, motor shuts down on its own but works later, or its life of 900-1,200 hours hasbeen used up. (If you don’t hear a click, then your relay most likely needs to be replaced and your motor may be fine). Five percent of the time, the mini breaker will go bad as well as the motor. If this happens, replace the motor and then evaluate the mini breaker.

How to replace: It is not difficult to replace the 119512 Ametek Motor. There are three bolts and a couple of wires. All of our customers are amazed at how easy it is. NOTE: There is no core trade-in. Used motors are thrown away or taken to a metal recycling center. Clickhere to read and print out our step-by-step motor replacement instructions. Note that if the unit bolts into metal brackets, then the ground wire can be snipped. If plastic, then attach the ground wire to the ground from the power cord or anywhere to metal on the unit.

• View All Motors
• How to Install Motors
• Test Motor & More
• Local Sales & Service
• Troubleshoot System
• How Motors Work